etching method
英 [ˈetʃɪŋ ˈmeθəd]
美 [ˈetʃɪŋ ˈmeθəd]
网络 蚀刻法; 浸蚀法
双语例句
- We propose to machine cylindrical micro-pins using the electrochemical etching method to control their shape and dimension.
提出了微细群圆柱结构电化学腐蚀加工法及其形状和尺寸控制方式。 - A patterned DLC thin film cathode was fabricated by reactive-ion etching method and mic ro-fabrication technology.
通过离子束技术和微细加工技术可以实现DLC薄膜的图形化并能大大提高薄膜的场发射性能。 - The grain boundary energy was measured with thermal etching method.
用热蚀刻方法测量了合金的晶界能。 - Fabrication of InGaAs Detector Using ICP Etching Method
InGaAs探测器制备的ICP刻蚀方法研究 - Response of Porous Silicon Prepared by Pulsed Electrochemical Etching Method to Ethanol Gas
脉冲腐蚀法制备的多孔硅对乙醇气体的响应 - Based on siphon principle and dynamic large cone chemical etching method, link them together organically to fabricate the optical fiber probes.
本文基于虹吸原理和动态大锥角化学腐蚀方法进行改进融合，成功制备出理想的光纤探针。 - A simple chemical etching method was developed for fabricating the super-hydrophobic surface on polycrystalline aluminum alloy.
采用简单化学刻蚀的方法制备出多晶铝合金基体上的超疏水表面。 - Preparation of Aluminum Superhydrophobic Surface with Nano-Micro Mixed Structure by SDBS/ HCl Etching Method
SDBS/HCl化学刻蚀法制备具有纳米-微米混合结构的铝基超疏水表面 - The twins in NYAB and NGAB crystals were investigated by synchrotron radiation topography and chemical etching method.
采用同步辐射形貌术结合化学腐蚀法，系统研究了NYAB和NGAB晶体中的孪晶结构。 - Study on Nd: YAG Crystal Dislocation by Chemical Etching Method
化学腐蚀法研究Nd：YAG晶体位错 - In addition, both second phase precipitation behavior during cooling after deformation and the effect of cooling rate on the second phase precipitation were studied by the electrolytic etching method and the carbon extraction replicas technique.
并且利用电解浸蚀和碳萃取复型法获取第二相析出物，从而对轧后冷却相变中的第二相析出行为进行了研究，并探讨了不同冷却速度对第二相析出的影响。 - The crystal defects were studied by optical method and chemical etching method.
用光学法和化学腐蚀法研究了晶体的缺陷，并分析了缺陷成因。 - A wet chemical etching method of n-GaN epitaxial layer grown on a sapphire substrate by MOCVD is investigated using UV of high pressure mercury lamp.
MOCVD用高压汞灯对n－GaN处延层进行了辐照湿法化学刻蚀研究，这种外延层是在A12O3衬底上用MOCVD方法生长的。 - Application of chemical etching method in the study of microstructure of PVC/ CaCO_3 composites
化学刻蚀法在PVC/CaCO3复合材料显微结构研究中的应用 - Analysis on defects of HgCdTe crystal growth in Bridgman under a magnetic field by etching method
磁场中布里奇曼法生长碲镉汞晶体的缺陷腐蚀分析 - The etching method is a key process during the fabrication of all-NbN superconductor tunnel junctions. In order to make high quality junctions we have done some researches on reaction ion etching ( RIE) method and ion etching method.
在制备所有的NbN超导隧道结的过程中，为了得到良好的隧道结，刻蚀是很关键的一步，我们对反应离子刻蚀（RIE）和离子刻蚀两种不同的方法进行了研究比较。 - In addition, we found the way to produce optical fiber nanoprobe without controlling the etching liquid temperature strictly in the traditional chemical etching method.
在传统的化学腐蚀法中实现了不严格控制腐蚀液温度也能制备出较好的纳米光纤探针。 - The chemical etching method is used to reveal dislocations produced by indentation on silicon single crystal specimens.
本文用化学侵蚀法显示了硅晶体印压产生的位错。 - In this paper a new method of detecting swirl-defects, an anodic electrolytic etching method, is presented.
本文报导一种显示漩涡缺陷的新方法&阳极电解付蚀法。 - Patterned porous silicon ( PS) films were fabricated based on hydrogen ion implantation technique and typical electrochemical anodic etching method.
基于氢离子注入技术和典型电化学阳极浸蚀法制备了多孔硅有图（PS）薄膜。 - Based this principle and the previous experimental work of our laboratory, this paper attempts to fabricate the AWG devices on SOI by wet etching method.
本文在实验室的前期工作基础上尝试了利用湿法刻蚀技术进行基于SOI材料AWG器件的波导制作。 - Ideally shaped cone cathodes have been successfully formed by using a two-step etching method.
提出了两步腐蚀的工艺方案，制成了形状理想的锥体阴极。 - Experiments are performed to confirm the chemical etching method for defining the crystallographic orientation of silicon single crystals.
通过实验肯定了硅单晶的化学侵蚀定向方法，找出抛光液的最佳配比及抛光时间。 - The defects in β-SiC epitaxial film are studied by means of etching method.
用腐蚀法研究了β-SiC外延层中的晶体缺陷。 - Large-area domain inversion of LiTaO_3 is successfully realized proved by thermoelectric effect and chemistry etching method.
利用热释电和化学腐蚀方法，成功地实现了钽酸锂晶体的大面积畴反转。 - The tetrahedral silicon tips of aspect ratio about 1.1 are made by dry etching method.
采用干法刻蚀的方法制备出纵横比约为1.1的四面体硅尖。 - On this basis, this paper has optimized both of times and obtained a more ideal etching method.
在此基础上，本文对两步法的工艺进行优化，最好得到了一个更理想的配方。 - The results of testing show that the silicon ( 111) crystal plane is very smoothing by etching method.
测试结果表明，利用腐蚀方法得到的硅的（111）晶面周期结构平整光滑。 - The fabrication techniques of near-field optical fiber probe by chemical etching method were introduced, deduced and discussed in detail.
对化学腐蚀加工近场光纤探针的方法作了详尽的推导、介绍和分析，为后文的展开作了理论铺垫。 - This paper fabricated the optical waveguide devices by wet etching method ( A technology used in microelectronic fabrication). This paper built up a testing system which is convenient and practical.
在器件制作过程中，本文采用了反刻法（一种微电子制作工艺）来制作具体光波导器件。最后，本文还建立了一套简便但却相对实用的测试系统。